Material selection and manufacture technology of stainless steel water tank

Material selection and manufacture technology of stainless steel water tank

Selection of stainless steel water tank

SUS304 plate should be selected for the material of stainless steel plate, and the content of nickel in SUS304 plate should be equal to 8.

The thickness of stainless steel plates is usually 1.2mm., 1.5mm, 2mm, 2.5mm, 3mm and so on. The thickness of stainless steel tanks and water tanks should be in accordance with the national standard.


Making process of stainless steel water tank

The folding of the 1. - shape board should reach 4cm to ensure the strength of the tank.

The 2. tank assembly weld finished full external assembling welding must be smooth and even, no flash, no pores. The welds in the internal welding must be ensured without leakage, and the one-time welding is required to be successful without leakage. The welding of the roof of the water tank requires full welding. There should be no leakage or spot welding, and the top angle should be fully welded. The welding must be welded by sub arc welding and stainless steel electrode, and the nonstandard welding operation is strictly prohibited.

3. stainless steel water tank support should be folded into a "concave" shape or "angle" shape, and no burr, fast mouth. The support welding should be full welding and no spot welding is strictly prohibited to ensure the strength of the support. The spacing of the supporting rod is generally not more than 1 meters, and the size should be in accordance with the requirements of the tensile strength. The size of the support lever should be magnified accordingly for a water tank with a special height.

4. stainless steel tank chassis should be welded with No. 10 channel steel to ensure leveling and leveling with a horizontal instrument.

The intake and outlet of 5. stainless steel water tank shall be welded by SUS304 stainless steel seamless steel pipe and stainless steel flange.

The manhole cover processing 6. stainless steel water tank, should be beautiful, smooth, no fast, and must be fully welded, after the installation of flexible switch. The ladder material be sure in the strength to climb the ladder, ensure the width is greater than or equal to 400mm, welding and manufacturing should pay attention to appearance, smooth.

Hangzhou FuYinDi Machinery Co., Ltd.

Add: Bldg. 1, No. 2, Shangsong Road, Yinhu Street, Fuyang Dist, Hangzhou, Zhejiang, China (Mainland)

Contact: Mrs Zhu

Mobile: 0086-13958396969

TEL: 0086-0571-87969991

E-mail: sujianxiao@fydmachine.net