Brewery Equipmens Cleaning Recommendations

  Brewery Equipmens cleaning recommendations

  There are a lot of Brewery Equipmens in the market for our choice, some of the purchase price is cheap, but did not provide the appropriate use of guidance, the following describes some brewing beer equipment cleaning method, so that your brewed beer is more interesting.

  Because often need to contact with the material, beer production equipment will always be unwitting to accumulate under the accumulation of many fouling. This has a great impact on the quality of the beer produced. In order to improve and maintain the quality of beer, in the production, not only to learn the correct beer production technology, but also learn the correct beer production equipment cleaning method.

  Beer production equipment, the correct cleaning method

  First, clean the pipeline

  In order to enhance the cleaning effect, in the cleaning of beer equipment in the pipeline, should pay attention to play its mechanical role. In order to receive a better cleaning effect, in the use of heat cleaning fluid, the flow rate should be controlled to one to one five meters per second; in the use of cold cleaning fluid, according to the diameter to determine the different flow rate The At the same time, for CO₂ and compressed air piping and its accessories, the cleaning problem should also be taken seriously.

  Second, clean the heat exchanger

  In principle, the cleaning heat exchanger and the cleaning line are the same. In the normal operating state, the medium in the heat exchanger is the flow state, so that if you want to have a better cleaning effect, you should use the original design flow of 20 to 30 percent higher than the cleaning fluid To clean the heat exchanger in the beer production equipment.

  Brewery Equipmens case

  Third, clean the tank

  You can use an automatic washer to clean the tank in the beer production facility. There are two types of cans: mechanical, spray type. If the brew beer equipment is dirty or the diameter of the tank is relatively large, this situation is suitable for mechanical cans, because its outlet pressure can increase, you can increase the cleaning strength, increase the cleaning radius. Compared to the spray cans, mechanical cans in the use of cleaning fluid flow lower.

  Four, cleaning Brewery Equipmens and machinery

  There is no fixed method for cleaning the parts and machinery of the beer production equipment and cleaning it according to the normal cleaning steps of the general equipment.